Aventics is a manufacturer of Pneumatic and Hydraulic products specifically pneumatic cylinders, pressure control valves, and other valve technology. Moving a big manufacturing location to Lexington, KY in June of 2014 is now increasing the ability for fast lead times and superior regional support. There are a few new products in particular however that have really gotten attention in the industrial world.
Aventics has been known for their Pneumatic products and cylinders, but their NFPA certified hydraulic cylinders compete with the best and with lead times as short as 3 days from the Aventics Quick Ship, ability to configure online with 2D/3D CAD Configurator, and exceeds all J.I.C. and NFPA requirements, these cylinders are definitely worth checking out!
Pressure Rating for Pneumatic (PPT) is 250 PSI and Hydraulic (PHT) up to 1500 PSI
Piston Rod Diameter: 5/8" through 5½"
Standard Mountings: 21
Bore Sizes: 1½" through 14"
Temperature Range: -65ÂşF to +200ÂşF ambient for standard Buna-N rod seals: -15ÂşF to +400ÂşF when fluorocarbon seals are used.
NPTF ports standard. Options: BSPP and ISO 6149-1, SAE (PHT only).
Rod End Threads: Standard male and female straight thread; plus optional male thread sizes.
Cushioning available in all bore sizes, and at either or both ends.
Piston Rods: Case hardened 50-55 Rockwell "C", chrome-plated and finished to 15 micro-inches or better.
Tie Rods: High-tensile, 1144 STRESSPROOF steel torqued at factory to standard specifications and secured by self-locking nuts.
Honed tubing, to 12 micro-inch finish. Pneumatic version has chrome plated I.D.
Pressure Rating: 3000 psi/5000 psi non-shock
Piston Rod Diameter: 5/8" through 8"
Standard Mountings: 22
Bore Sizes: 1½" through 14" (some limitations apply for 14", contact factory for details)
Temperature Range: -65ÂşF to +200ÂşF ambient for standard Buna-N rod seals: -15ÂşF to +400ÂşF when fluorocarbon seals are used.
SAE ports standard. Options: BSPP and ISO 6149-1
Rod End Threads: Standard male and female straight thread; plus optional male thread sizes.
Cushioning available in all bore sizes, and at either or both ends.
Piston Rods: Case hardened 50-55 Rockwell "C", chrome-plated and finished to 15 micro-inches or better.
Tie Rods: High-tensile, 1144 STRESSPROOF steel torqued at factory to standard specifications and secured by self-locking nuts.
Honed steel cylinder tubing. Resists external damage.
Need a small footprint? Well with a compact size of 1.2” x 3” the Aventics ED02 provides exceptionally high performance and can deliver a proportional pneumatic pressure to an analog system. Surprisingly ideal for pilot control of larger pneumatic regulators, but also due to the accuracy it has extraordinary capabilities for precision low-pressure applications. The ED05 also provides a proportional pneumatics pressure to an analog signal, excellent hysteresis for precise control, high flow capacity, and variety of inputs for flexibility.
Electrical signal to graduated pneumatic pressure
Output pressure range from -14.5 psi to +145 psi
Input range from 0-10vdc, 0-20mA, 4-20mA
3.5 SCFM flow capacity @ 101 psi supply controlling 87 psi
ISO G1/8 ports
Hysteresis <0.5 psi
Analog feedback standard
Operates on 24vdc
NEMA 4 protection rating (IP65-IEC 60529)
35.3 SCFM (1000 l/min) flow capacity
1/4" universal pneumatic port threads - accept inch or ISO G (BSPP) fittings
<0.06 bar hysteresis
Analog feedback signal standard (except for Potentiometer input)
Temperature Range: -65ÂşF to +200ÂşF ambient for standard Buna-N rod seals: -15ÂşF to +400ÂşF when fluorocarbon seals are used.
Operates on 24vdc
NEMA 4 (IP65) protection rating (NEMA 4x optional)
Fieldbus compatible
If you are looking for a valve that will perform well in every situation then the Aventics AV series is just what you are looking for. Due to its optimized compressed air balance and flexible base plate system, it offers 45% space savings, 40% less weight and 20% less compressed air consumption. Also the plug-in design allows for quick valve change-out during operation.
The Aventics CL (Clean Line) Series was specifically designed for such industries as food & beverage in which high pressure wash-down applications are part of the application required. The gaps between the valve protection covers allow easy cleaning and avoid dirt pockets. No more need to store these in a cabinet for protection against wash-downs, the high flow Clean Line valve system has an IP69K (better than NEMA 6P) protection class rating.
Valve type: Spool valve, zero overlap
Flow: AV03: 0.3 Cv (300 l/m), AV05: 0.7 Cv (700 l/m)
Standard Mountings: 21
Manual Overrides: Locking or non-locking styles
Electrical Voltage: 24 VDC
NPTF ports standard. Options: BSPP and ISO 6149-1, SAE (PHT only).
Power Consumption: 0.55 W
Protection: NEMA 4 / IP65 with electrical connector/plug (IP54 without electrical connector)
Indicator: Yellow LED
Flow: CL03: 0.75-0.85 Cv (750-850N l/m), CL03-XL: 1.1 Cv (1100N l/m), CL03-EV: 0.7 Cv (700N I/m)
Materials:
Seals: HNBR
Bore Sizes: 1½" through 14"
All screws and fittings (optional): Stainless Steel
Plug-in design for quick valve change-out
Manual Overrides: Locking or non-locking styles
Electrical Voltage: 24 VDC
Power Consumption: 0.35 W
Protection class: Exceeds NEMA 6P (IP 69K) with covers
Indicator: LED per coil
American industry has never enjoyed more opportunity than it does today – or faced more challenges. Hydrotech is here to help you compete, evolve, lead, and win with superior solutions in fluid power, automation, service & repair, and connected technologies.