You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
WFV


$44.90 USD

Tags:

  • SUN HYDRAULICS
  • Material:WFV
  • Summary:Manifold

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics WFV (Material Number: WFV) is a line mount hydraulic manifold designed for robust applications requiring efficient fluid control. This manifold features a ninety-degree body type and is constructed from 6061T651 aluminum, known for its strength, cost-effectiveness, and excellent corrosion resistance. It includes two mounting holes with a diameter of .34 inches (8.6 mm) that go through the body, allowing secure and straightforward installation. The manifold accommodates one open cavity with a T9A cavity specification and has a port size of 14 BSPP, making it versatile for various hydraulic systems. It is crucial to consider that the maximum system pressure should not exceed 3000 psi (210 bar), as this is the pressure limit for aluminum manifolds regardless of port size or type. This product is ideal for applications where reliability in high-flow valve systems is necessary, providing dependable performance without the need for anodizing, which can impact fatigue life due to its brittle nature on aluminum surfaces.

Body TypeLine mountLine mount
InterfaceNoneNone
Body FeaturesNinety degreeNinety degree
Mounting Hole Diameter.34 in.8.6 mm
Mounting Hole DepthThroughThrough
Mounting Hole Quantity22
Open Cavities11
CavityT-9A
Port Size1/4" BSPP1/4" BSPP

Show FAQ

Additional Resources



Notes:
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.