You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
WPO


$95.40 USD

Tags:

  • SUN HYDRAULICS
  • Material:WPO
  • Summary:Manifold

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics WPO (Material Number: WPO) is a line mount manifold designed for hydraulic applications requiring an inline, cross pilot body feature. It is constructed using 6061-T651 aluminum, known for its strong corrosion resistance and cost-effectiveness. The manifold features two mounting holes with a diameter of 0.34 inches (8.6 mm) and is designed with a through-depth configuration. It accommodates one open cavity and is compatible with T-2A cavities, making it versatile for various hydraulic setups. The port size is specified as 1/4 NPTF, providing standard connectivity options for hydraulic systems. This manifold is engineered to withstand pressures up to 3000 psi (210 bar), which should be carefully considered when integrating into any system to ensure optimal performance and safety. The Sun Hydraulics WPO does not undergo anodizing, as the benefits are deemed unnecessary given the inherent properties of the aluminum used, such as its corrosion resistance and impact on fatigue life. This product serves as a reliable component in hydraulic circuits where durability and performance are critical under specified pressure conditions.

Body TypeLine mountLine mount
InterfaceNoneNone
Body FeaturesInline, cross pilotInline, cross pilot
Mounting Hole Diameter.34 in.8.6 mm
Mounting Hole DepthThroughThrough
Mounting Hole Quantity22
Open Cavities11
CavityT-2A
Port Size1/4" NPTF1/4" NPTF

Show FAQ

Additional Resources



Notes:
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.