You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
WQP


$179.30 USD

Tags:

  • SUN HYDRAULICS
  • Material:WQP
  • Summary:Manifold

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics WQP (WQP) is a motor mount manifold designed to facilitate the control and protection of hydraulic motors. This product features a Danfoss OMS interface and includes cross pilot with shuttle body features, making it suitable for various hydraulic applications. The manifold has a mounting hole diameter of 0.42 inches (10.7 mm) and a depth that goes through, with a counterbore diameter of 0.69 inches (17.5 mm) and depth of 0.43 inches (11.0 mm). It accommodates 22 mounting holes and open cavities, using the T-2A cavity configuration with a port size of 1/2 NPTF. Constructed from 6061-T651 aluminum, this manifold offers strong corrosion resistance without the need for anodizing, which can reduce fatigue life by up to 50%. It is important to consider the maximum system pressure when using this manifold, as aluminum manifolds are not rated for pressures exceeding 3000 psi (210 bar). The design ensures reliable performance in hydraulic systems requiring precise motor control and protection while maintaining structural integrity under specified pressure conditions.

Body TypeMotor mountMotor mount
InterfaceDanfoss OMSDanfoss OMS
Body FeaturesCross pilot with shuttleCross pilot with shuttle
Mounting Hole Diameter.42 in.10,7 mm
Mounting Hole DepthThroughThrough
Mounting Hole C'bore Diameter.69 in.17,5 mm
Mounting Hole C'bore Depth.43 in.11,0 mm
Mounting Hole Quantity22
Open Cavities22
CavityT-2A
Port Size1/2" NPTF1/2" NPTF

Show FAQ

Additional Resources



Notes:
  • Port S is the external connection in the end of the shuttle cartridge.
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.