You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
WRP


$84.90 USD

Tags:

  • SUN HYDRAULICS
  • Material:WRP
  • Summary:Manifold

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics WRP (Material Number: WRP) is a line mount manifold designed for hydraulic systems, featuring a through port 2 with a gauge port. This manifold accommodates SAE 6 port sizes and includes one open cavity, specifically the T-11A cavity. It is constructed from 6061-T651 aluminum, known for its strength and corrosion resistance, making it suitable for various hydraulic applications where durability and reliability are crucial. The manifold features two mounting holes with a thread size of .375-16 UNC 2B and a depth of .62 inches (15.7 mm). These specifications ensure secure installation in compatible hydraulic systems. The Sun Hydraulics WRP manifold is not anodized, which preserves its fatigue life by avoiding the brittle surface that anodizing can introduce. This product is ideal for applications requiring efficient fluid control and pressure management within the specified pressure limits of aluminum manifolds, which are not rated for pressures exceeding 3000 psi (210 bar).

Body TypeLine mountLine mount
InterfaceNoneNone
Body FeaturesThrough port 2 with gauge portThrough port 2 with gauge port
Mounting Hole Thread.375-16 UNC - 2B in..375-16 UNC - 2B in.
Mounting Hole Depth.62 in.15,7 mm
Mounting Hole Quantity22
Open Cavities11
CavityT-11A
Port SizeSAE 6SAE 6

Show FAQ

Additional Resources



Notes:
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.