You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
YCD


$181.00 USD

Tags:

  • SUN HYDRAULICS
  • Material:YCD
  • Summary:Manifold

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics YCD (Material Number: YCD) is a line-mount manifold designed for hydraulic systems, featuring a cross-port configuration with gauge ports. Its body type is tailored for line mounting and does not require an interface. The manifold includes two open cavities and is compatible with T-3A cavity specifications. It supports a port size of 3/4 NPTF, ensuring versatile application in various hydraulic setups. Constructed from 6061-T651 aluminum, this manifold offers strong corrosion resistance without the need for anodizing, which can compromise fatigue life and increase manufacturing complexity. The mounting holes are threaded at .375-16 UNC 2B inches with a depth of .62 inches, providing stable installation with two holes available for secure attachment. This product should be considered for applications where system pressures do not exceed 3000 psi (210 bar), as the aluminum construction dictates this pressure limitation regardless of port size or type.

Body TypeLine mountLine mount
InterfaceNoneNone
Body FeaturesCross port with gauge portsCross port with gauge ports
Mounting Hole Thread.375-16 UNC - 2B in..375-16 UNC - 2B in.
Mounting Hole Depth.62 in.15,7 mm
Mounting Hole Quantity22
Open Cavities22
CavityT-3A
Port Size3/4" NPTF3/4" NPTF

Show FAQ

Additional Resources



Notes:
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.