You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
YKF


$256.60 USD

Tags:

  • SUN HYDRAULICS
  • Material:YKF
  • Summary:Manifold

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics YKF (Material Number: YKF) is a line mount manifold designed with specific features to enhance hydraulic system operations. This manifold features a cross pilot with shuttle body type and includes two open cavities, identified as T-17A. It is designed to accommodate 1 1/4 NPTF port sizes, making it suitable for various hydraulic applications requiring robust fluid control. The unit is constructed from 6061-T651 aluminum, which offers excellent corrosion resistance and durability under standard operating conditions, although it is not anodized to maintain cost-effectiveness and logistical efficiency. The manifold's mounting hole diameter is .42 inches (10.7 mm), with a through depth configuration, and includes two mounting holes for secure installation. It is crucial to consider that the maximum system pressure should not exceed 3000 psi (210 bar) due to the material limitations of aluminum, ensuring safe and optimal performance in hydraulic systems.

Body TypeLine mountLine mount
InterfaceNoneNone
Body FeaturesCross pilot with shuttleCross pilot with shuttle
Mounting Hole Diameter.42 in.10,7 mm
Mounting Hole DepthThroughThrough
Mounting Hole Quantity22
Open Cavities22
CavityT-17A
Port Size1 1/4" NPTF1 1/4" NPTF

Show FAQ

Additional Resources



Notes:
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.