Hydrotech Acquires Isaacs
Hydrotech ecommerce supports the continental US only

SUN HYDRAULICS CORP
X2FDLANCA212
Circuit Savers

Y-assembly

SUN HYDRAULICS CORP

MATERIAL:  X2FDLANCA212

SUMMARY:  Y-assembly

Due to extremely high demand, please call 888-651-5712 for availability

This assembly consists of a fully-adjustable, pressure-compensated flow control with reverse-flow check which provides precise flow regulation for meter-in or meter-out applications where there may be wide pressure fluctuations. It is infinitely adjustable from nearly closed up to the maximum flow. An integral high-capacity check valve provides unrestricted flow in the reverse direction. The rapid or feed rate is selected by a solenoid operated (normally open or closed) 2-way, 2-position valve.

  • The sharp-edged orifice design minimizes flow variations due to viscosity changes.
  • A balanced adjustment mechanism allows for easy adjustment even at high pressures.

Capacity60 gpm240 L/min.
Body TypeSandwichSandwich
InterfaceISO 07ISO 07
Body FeaturesMeter in PMeter in P
Stack Height3.52 in.90 mm
Seal Plate Included (see notes)YesYes

Show FAQ

Additional Resources



Notes:
  • Stack height value in technical data table includes seal retainer plate.
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.