Hydrotech ecommerce supports the continental US only
SUN HYDRAULICS CORP
FSDDXBV
Speciality
Cartridge
$158.00
SUN HYDRAULICS CORP
MATERIAL: FSDDXBV
SUMMARY: Cartridge
Quantity in stock: 2
Quantity Details:- Hydrotech Stock: 0 can ship May 7, 2024
- Factory Stock: 2 can ship August 6, 2024
Flow dividers are sliding-spool, pressure-compensated devices used to split oil flow to two different branches of a circuit in a designated ratio. These valves are suitable for applications that use the following: unidirectional hydraulic motors, hydraulic cylinders where flow division in one direction only is required, and multiple circuits that are serviced from one pump supply.
- All flow divider and divider/combiner cartridges are physically interchangeable (i.e. same flow path, same cavity for a given frame size).
- Operating characteristics cause the leg of the circuit with the greatest load to receive the higher percentage of flow in dividing mode. If a rigid mechanism is used to tie actuators together, the lead actuator may pull the lagging actuator and cause it to cavitate.
- In applications involving rigid mechanisms between multiple actuators, operating inaccuracy will cause the eventual lock-up of the system. If the mechanical structure is not designed to allow for the operating inaccuracy inherent in the valve, damage may occur.
- In motor circuits, rigid frames or mechanisms that tie motors together, and/or complete mechanical synchronized motion of the output shaft of the motors, either by wheels to the pavement or sprockets to conveyors, will contribute to cavitation, lock-up and/or pressure intensification.
- Variations in speed and lock-up can be attributed to differences in motor displacement, motor leakage, wheel diameter variance and friction of wheels on the driving surface.
- This valve is a divider only; any attempt to flow backwards through the valve is not advised.
- Dividers with unequal ratios have the higher flow at port 4.
- Below the minimum flow rating there is not enough flow for the valve to modulate. It is effectively a tee. If flow starts at zero and rises, there will be no dividing control until the flow reaches the minimum rating.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Cavity | T-32A |
Series | 2 |
Capacity | 3 - 15 gpm12 - 60 L/min. |
Maximum Operating Pressure | 5000 psi350 bar |
Divisional Accuracy at Minimum Input Flow | ±6.5%±6.5% |
Divisional Accuracy at Max Input Flow | ±3.5%±3.5% |
Pressure Drop at Minimum Rated Input Flow | 30 psi2 bar |
Pressure Drop at Maximum Rated Input Flow | 250 psi18 bar |
Rated Input Flow with 50/50 Split | 3 - 15 gpm12 - 60 L/min. |
Rated Input Flow with 40/60 Split | 2.5 - 12.5 gpm9,4 - 47 L/min. |
Rated Input Flow with 33/67 Split | 2.2 - 11 gpm8,4 - 42 L/min. |
Valve Hex Size | 1 1/8 in.28,6 mm |
Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
Model Weight | .60 lb0,30 kg |
Seal kit - Cartridge | Viton: 990-032-006 |
Show FAQ