Hydrotech ecommerce supports the continental US only
SUN HYDRAULICS CORP
FTCGXRN
Directional
Cartridge
$236.40
SUN HYDRAULICS CORP
MATERIAL: FTCGXRN
SUMMARY: Cartridge
Quantity in stock: 0
This valve is a 3-way, 2 position, proportional directional valve. In the spring biased position, a metered path is open between 2 and 3 with port 4 blocked. Pilot pressure at port 1 creates a metering orifice between 3 and 4 that is proportional to the pressure at 1. The force balance of the flow forces, spring and pilot pressure results in a degree of partial self compensation as the load pressure changes. The spring chamber is drained through port 6 and port 5 is not used.
Depending on the spool specified, ports 2, 3, and 4 are either closed or restricted during transition.
- Nominal operating pressures for port 1 and port 6 should not exceed 500 psi (35 bar).
- Using 2 3-ways to create a 4-way allows one to choose existing flow ranges instead of cutting a special spool.
- These valves may be pressure compensated by an external, modulating, logic element. Use LR_C-XHN for a bypass circuit or LP_C-XHN for a restrictive circuit.
- The valve provides a degree of self-compensation and may be used as a flow control. To increase the accuracy of flow control, an external, modulating, logic element can be used to maintain a constant flow over a wider range of flows and pressures. See performance curves for additional information.
- Pressure at ports 1 and 6 directly oppose each other.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Cavity | T-52A |
Series | 2 |
Capacity | 7 gpm28 L/min. |
Minimum Pilot Pressure Required to Shift Valve | 50 psi3,5 bar |
Pilot Pressure Required for Full Shift at Rated Flow | 300 psi20 bar |
Maximum Operating Pressure | 5000 psi350 bar |
Maximum Valve Leakage at 110 SUS (24 cSt) | 2 in³/min.30 cc/min. |
Pilot Volume Displacement | .04 in³0,66 cc |
Hysteresis | ± 2 %± 2 % |
Valve Hex Size | 1 1/8 in.28,6 mm |
Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
Model Weight | 1.00 lb0,45 kg |
Seal kit - Cartridge | Viton: 990-052-006 |
Show FAQ