Hydrotech ecommerce supports the continental US only
SUN HYDRAULICS CORP
CXBMXCV
Load Holding
Cartridge
$28.60
SUN HYDRAULICS CORP
MATERIAL: CXBMXCV
SUMMARY: Cartridge
Quantity in stock: 2
Quantity Details:- Hydrotech Stock: 0 can ship May 3, 2024
- Factory Stock: 2 can ship August 2, 2024
Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.
- This valve is what we call an Insert style. It is meant to be buried in a manifold or actuator. The cavity drawing for the T-162DP cavity contains a lot of detailed information and should be studied closely when applying this valve.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Cavity | T-162DP |
Series | 0 |
Capacity | 10 gpm40 L/min. |
Maximum Operating Pressure | 5000 psi350 bar |
Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
Valve Internal Hex Size | 5/16 in.8 mm |
Valve Installation Torque | 20 - 25 lbf ft27 - 33 Nm |
Model Weight | .20 lb0,10 kg |
Seal kit - Cartridge | Viton: 990-162-006 |
Show FAQ