Hydrotech ecommerce supports the continental US only
SUN HYDRAULICS CORP
SXCBKAN
Pressure Control
Cartridge
$111.80
SUN HYDRAULICS CORP
MATERIAL: SXCBKAN
SUMMARY: Cartridge
Quantity in stock: 1
Quantity Details:- Hydrotech Stock: 0 can ship May 9, 2024
- Factory Stock: 1 can ship July 11, 2024
Atmospherically referenced, direct-acting sequence valves will supply a secondary circuit with flow once the pressure at the inlet (port 1) has exceeded the valve setting. The pressure setting of this sequence valve controls the pressure at port 1 relative to the atmospheric vent.
- Suitable for use in load holding applications.
- Atmospherically referenced valves should only be used where it is impossible have a drain connection. Over time, the atmospherically referenced valves may leak externally or allow moisture into the spring chamber.
- Approximately 1 drop (0,07 cc) of fluid will pass into the vented spring chamber every 4000 cycles.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Cavity | T-13A |
Series | 1 |
Capacity | 15 gpm60 L/min. |
Factory Pressure Settings Established at | 2 in³/min.30 cc/min. |
Maximum Operating Pressure | 5000 psi350 bar |
Response Time - Typical | 2 ms2 ms |
Maximum Valve Leakage at Reseat | 10 drops/min.0,7 cc/min. |
Adjustment - Number of Clockwise Turns to Increase Setting | 44 |
Valve Hex Size | 7/8 in.22,2 mm |
Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
Locknut Hex Size | 9/16 in.15 mm |
Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
Model Weight | .30 lb0,15 kg |
Seal kit - Cartridge | Viton: 990-010-006 |
Show FAQ
Additional Resources
- Sun Offers Zinc-Nickel Plating for Corrosion Resistance
- Sun Cartridges with EPDM Seals
- Sun Expands Corrosion-Resistant Solutions
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
- Sequence Valves Technical Tips
- Manufacturing Sun Cartridge Cavities
- Sequence Valves
- Sun Model Code Explanation; 999-901-334
- Cavity Information (S-171) and Tooling
- Cartridges: Materials of Construction
- Fluid and Temperature Recommendations
- Performance Data
- Sun's Floating Style Screw-In Cartridge
- Units of Measure, Settings, and Conversions