Hydrotech Acquires Isaacs
Hydrotech ecommerce supports the continental US only

BOSCH REXROTH
R-IBIL24SEG/F-PAC
R911170790

I/O Rexroth Inline PWR modules

$97.01

BOSCH REXROTH

MATERIAL:  R911170790

SUMMARY:  I/O Rexroth Inline PWR modules

Quantity in stock: 1

Quantity Details:
  • Hydrotech Stock: 0 can ship May 7, 2024
  • Factory Stock: 1 can ship June 25, 2024
Add to Cart

This module is designed for use within an Inline station. It can be used to build a fuse-protected sub-circuit (segment circuit) within a main circuit. The module cannot be used to supply power, so it does not come with any reverse polarity or overvoltage protection.

General data

Type

R-IB IL 24 SEG/F-PAC

Weight 1)

g

59

Ambient temperature (operation)

-25 °C ... +55 °C

Ambient temperature (storage/transport)

-25 °C ... +85 °C

Permissible relative humidity (operation)

10 % ... 95 %, EN 61131-2

Permissible relative humidity (storage/transport)

10 % ... 95 %, EN 61131-2

Air pressure (operation)

70 kPa ... 106 kPa (up to 3000 m above sea level)

Air pressure (storage/transport)

70 kPa ... 106 kPa (up to 3000 m above sea level)

Protection type

IP20, IEC 60529

Protection class

III, EN 61113-2, IEC 61113-2
1) Including plug

Connection data

Type

R-IB IL 24 SEG/F-PAC

Designation

Inline connection plug

Connection type

Tension spring modules

Conductor cross-section solid/flexible/AWG

0.2 mm² ... 1.5 mm²
0.2 mm² ... 1.5 mm²
24 ... 16

Interface local bus

Type

R-IB IL 24 SEG/F-PAC

Transmission speed 1)

kBit/s

MBit/s

500
2
1) Can be used with this transmission speed in Inline stations, if required

24 V peripheral supply

The voltage is fed in the bus coupler or in the feed module. Connections for the supply voltage are not needed at the segment module. The corresponding module points are available only for test purposes.

Permissible total current in the potential jumpers of the main and segment circuits

Type

R-IB IL 24 SEG/F-PAC

Permissible total current in the potential jumpers

A

8

Nominal module current

A

6

Protective devices

Type

R-IB IL 24 SEG/F-PAC

Overload/short-circuit protection in the segment circuit

Safety fuse 5 x 20 mm with 6.3 A time-lag (maximum value of fuse 8 A. For fuses with a value of greater than 2 A, only use slow fuses!)

Reverse polarity protection

Protection components in the feed module or in the bus coupler

Overvoltage protection

Protection components in the feed module or in the bus coupler

Electrical isolation/insulation of the voltage ranges

Type

R-IB IL 24 SEG/F-PAC

Common potentials

24 V main voltage UM, 24 V segment voltage US and GND are on the same potential. FE represents a separate potential area.

Separate potentials in the system of bus coupler/feed module and I/O module

Test distance

Test voltage

5 V supply incoming remote bus/7.5 V supply (bus logic)

500 V AC, 50 Hz, 1 min.

5 V supply to further remote bus/7.5 V supply (bus logic)

500 V AC, 50 Hz, 1 min.

7.5 V supply (bus logic)/24 V supply (peripherals)

500 V AC, 50 Hz, 1 min.

24 V supply (peripherals)/function earth

500 V AC, 50 Hz, 1 min.

Error messages to the higher-level control or computer system

Type

R-IB IL 24 SEG/F-PAC

Error message

None

Approvals

The current approvals can be found at www.boschrexroth.com.

technical illustration-R-IBIL24SEG/F-PAC-I/O Rexroth Inline PWR modules

Dimensions

Type

R-IB IL 24 SEG/F-PAC

A

mm

12.2

B

mm

120

C

mm

71.5

Note on dimensions

The depth applies when using a support rail TH 35-7.5 (acc. to EN 60715).