BOSCH REXROTH
R066701600
All Other Products
LB Rotation- 16-needle bearing -100Cr6
BOSCH REXROTH
MATERIAL: R066701600
SUMMARY: LB Rotation- 16-needle bearing -100Cr6
Quantity in stock: 1
Quantity Details:- Hydrotech Stock: 0 can ship May 6, 2024
- Factory Stock: 1 can ship August 5, 2024
General technical data
Ø d |
mm |
5 | 8 | 12 | 16 | 20 | 25 | 30 | 40 1) | 50 1) | 60 1) | 80 1) |
m |
kg |
0.02 | 0.04 | 0.08 | 0.1 | 0.2 | 0.34 | 0.56 | 1.39 | 2.18 | 4.14 | 7.11 |
Operating conditions |
||||||||||||
Permissible ambient temperature (min ... max) |
-10 °C ... +80 °C |
1) | Contrary to the figure, these sizes come with two needle bearings. |
Load capacities and load moments
Ød |
mm |
5 | 8 | 12 | 16 | 20 | 25 | 30 | 40 1) | 50 1) | 60 1) | 80 1) |
C 2) |
N |
180 | 320 | 420 | 580 | 1170 | 2080 | 2820 | 5170 | 8260 | 11500 | 21000 |
C0 2) |
N |
140 | 240 | 280 | 440 | 860 | 1560 | 2230 | 3810 | 6470 | 9160 | 16300 |
1) | Contrary to the figure, these sizes come with two needle bearings. |
2) | The load ratings indicated are minimal values as the orientation and direction of load cannot always be clearly defined. |
The load ratings are based on a total travel of 100, 00 m. When based on 50 000 m, the values in the table need to be multiplied by 1.26. |
Legend
Symbol |
Description |
Unit |
Ød |
Shaft diameters |
mm |
C |
Dynamic load capacity |
N |
C0 |
Static load capacity |
N |
m |
Mass |
kg |
Definition of dynamic load ratings
a) | Recommended installation |
b) | Retaining ring |
Dimensions
Ød |
mm |
5 | 8 | 12 | 16 | 20 | 25 | 30 | 40 1) | 50 1) | 60 1) | 80 1) | |
D |
mm |
19 | 24 | 30 | 34 | 42 | 50 | 57 | 80 | 92 | 110 | 140 | |
A |
mm |
12 | 14.1 | 20 | 22.1 | 28 | 40 | 48 | 56 | 73.1 | 95 | 125 | |
b |
mm |
12 | 13 | 16 | 20 | 30 | 56 | 70 | 81.6 | ||||
B |
mm |
22 | 25 | 32 | 36 | 45 | 58 | 68 | 80 | 100 | 125 | 165 | |
C3 |
H12 |
mm |
14.6 | 16.5 | 23.2 | 25.3 | 31.2 | 43.2 | 51.2 | 60.2 | 78.3 | 100.2 | 130.2 |
C4 |
H13 |
mm |
1.3 | 1.6 | 2.2 | 2.7 | |||||||
D1 |
mm |
12 | 16 | 22 | 26 | 32 | 40 | 47 | 62.2 2) | 75 | 90 | 120 | |
D2 |
mm |
13.8 | 19.3 | 24.2 | 28.4 | 35.1 | 43.1 | 49.1 | 74.2 | 80.6 | 95 | 128 | |
D3 |
mm |
- | 23 | 28 | 32 | 40 | 48 | 55 | - | 90 | 108 | 138 | |
D4 |
H11 |
mm |
19.5 | 24.8 | 31 | 35 | 43.2 | 51.2 | 58.5 | 81.8 | 94 | 112.3 | 142.6 |
Retaining ring 3) |
SB19 | SB24 | SB30 | SB34 | SB42 | SB50 | SB57 | SB80 | SB92 | SB110 | SB140 |
1) | Contrary to the figure, these sizes come with two needle bearings. |
2) | The basic body is a special version of the closed standard Linear Bushing. |
3) | Seeger-Orbis GmbH |
Recommended installation tolerances
Shaft: dh6 Housing bore DK6 or DK7 Another tolerance zone can be chosen in special instances. See recommended installation for axial retention of the needle bearing in the housing. Installing the needle bearing in the housing without additional axial securing is sufficient for numerous applications. Needle bearing with backlash on standard Linear Bushing.General mounting instructions
Initial lubrication
Linear bushings do not come with initial lubrication. Grease the Linear Bushings before use. Service life data is based on initial lubrication and relubricated Linear Bushings.